2023 Huntsville Hamfest from the view of a vendor this time!!!

Man time flies! It has already been a year since me and Trey had come over and bought all those military surplus cases and stuff! I cant understand how that has happened…

Anyway, I signed up for a table in the “bone yard” which is indoors at Huntsville, which is nice since it means it is out of the direct sun in August and has air conditioning. Well Trey arrives the day of the event and I already have my stuff int he truck, we just load a couple things he is bringing and we are off.

Side notes: Check out the vintage Ten Tec t-shirt I only get out for this and sometimes Field Day, I am probably the only person alive who still has one. I am also monitoring two ham bands here, our 2 meter simplex frequency and our 1.25 meter simplex frequency, We used both over the course of the day to make contact with friends. Back to the story already in progress…

We get to the convention center right on time and find a huge line of cars waiting to get into the show area. Once we work our way through the line we figure out these people are parking in the underground parking lot and we need to go to the back to unload the truck, well we get out of line, unload the truck and setup in short order. I can tell already it is going to be a good show for me when I can’t even get the truck parked before Trey (who went with the stuff to the table) is already being pummeled by dealers wanting to buy my stuff! This is a good sign!

By the time this photo was taken, the Icom IC 705 and tuner were sold. It literally lasted 5 minutes. this is good as the proceeds from the sale of this radio went to purchase the sBitx radio that I want for POTA instead. I had also already sold one of the two power supplies I took over as well. Common items seem to have went really fast to be honest.

Here, Trey (KG4WBI) Is getting settled in for the long arduous day of minding the table. Also, at this point I still had the Elecraft K1 pictured here as well. More on this radio later.

Once the doors opened, it was a free for all till about lunch time. It was REALLY crowded with so many people that it was hard to imagine the total number of participants. Everybody seemed to have a radio, even the little kids!

Things moved off of the table steadily all morning though and I had high hopes that I would actually achieve my goal of not taking any of it home with me! Each little item, one by one, would get picked up and bought by some enterprising person looking for the find of the day. I was happy to help them too.

After lunch I made my way over to the POTA table and grabbed a photo for the blog, they were pretty busy so I didn’t bother them with my shenanigans but left them to inform the youth about the wonders of ham radio. While out on my stroll I did check on a couple of items I was looking for and stopped to play with the N3ZN keys for a minute as they are SWEEEEET! Then it was back to the grind of tending “shop”…

I continued to see the stuff I didn’t use goto new homes one at a time till I was down to the K1, the Ten Tec 238 tuner and the Comet Antenna Analyzer. Then the strangest thing happened. I had to goto the bathroom. Well, that wasnt really all that odd, but what was happening at the table was. Turns out Josh from Ham Radio Crash Course had sent out scouts looking for a K1 or a K2 and they found mine and told him. He was livestreaming the event too! Well, he finds the table and makes his way over to it to find Trey minding the booth in my absence. You can actually watch his stream and see the whole thing transpire, just fast forward to about the 18 minute mark to see where it all starts.

Ham Radio Crash Course Video

A little back story here. I love the little K1, it was a favorite of mine for many years and I have used it off and on for that time. I just took a long hard look at the gear in the shack and realized the K1 sits on a shelf WAY more than not and I needed it to goto a good home where it would see more air time. So with a little sadness, I packed it up to goto the hamfest to find a new home. I get attached to things like this way to much and this is an exercise in decluttering my life, I wanted to move out a ton of gear and not just throw it away or such but turn it into something I would use instead. The K1 is just a plain fun radio to use, hence the pain in seeing it leave. I believe Josh will do a wonderful job at this and look forward to seeing the little K1 on his youtube channel soon.

It was great interacting with him and getting to chat for a minute, he took it straight way over to the test bench and had them check it for operation and he was happy it worked as advertised, All of this is also in the livestream…lol.

Then I had one more trek around a little to pick up a few items I have been looking for and actually found. I got a coax and some connectors from the Wire Man, I got the drop-in desk charger for my old Icom HT I have been using lately and it even came with a working radio! So now I have two!!! HAHA, why did I come to the hamfest again??? Then I bought a cable from another cable builder, ABR Industries, and I must say they look really good, I wanted a new coax for my POTA work and he builds his with common mode chokes built into the cable, that is really nice and i am looking forward to testing this cable on the nanoVNA to see how it compares to my homebrew chokes I made.

Then the finale of the day came when I went back over to N3ZN’s booth and talked to him about a small POTA key. The next thing I know, I bought one!

This key is tiny, at about 1.5” by 1.5”, it will be an awesome POTA key. I am going to look into how I plan to use it and expect there to be blog posts coming soon about it. I also got to talk to the man himself while he filed out my ticket on it and he is an amazing guy, I count it as a blessing to have met him. Hopefully we will cross paths again soon. If I get the chance I want to share with him my keys I built back in the day, we talked for a while and he is one of the few people that can actually appreciate the work that went into making them.

In closing I wanted to share a photo of my current dream rig, the Elecraft K4 with or without the amplifier, I just want the radio to be honest. At some point I will upgrade from the aging Ten Tec radios in my shack and this is probably what will replace them. I love everything about this radio and quietly take a peek at it when I am at the hamfest, but for now, there is POTA to do and contacts to make with the gear I have!

PS: All I brought home was the antenna analyzer and the Ten Tec tuner, both of which I dont mind holding on to for a while longer…

73

WK4DS-David

Huntsville Hamfest 2022 AAR

So it has come and went again, the Huntsville Hamfest was alive and well this year with a strong showing from major companies as well as a sizeable boneyard! Who doesn’t like a good boneyard?!?

We started our morning by grabbing some coffee in Scottsboro on our way from Trenton and heading over to Huntsville. Since we had paid online we did not have to buy our tickets at the gate and we were able to immediately register, get a pin and go on into the Hamfest. I have to admit, I was a little bit taken aback when we got into the show iteself by seeing all of the vendors that were there. There were so many vendors in new equipment, product manufacturers and the boneyard was unbelievable. It was like I had went back in time 20 years to a hamfest. I have always been more interested in the boneyard than I have in new equipment so we focused most of our time wondering the boneyard looking at things from days gone by and occasionally buying stuff.

This was the second trip to the truck of the day… lol

We bought so much stuff that we had to go get a little red wagon cart out of the truck to haul it all back with. I finally bought an amplifier and a power supply to drive it, as well as a few antenna tuners and some other little odds and ends, OH YEAH! and a 20 meter hamstick for my POTA ops to reduce the kit size if possible on some outings. I don’t even remember what Roger bought other than the STACK of those green hard shell cases from GigaParts! Lol, I think he ended up with 4 of them before he was done! HaHa. He has so many portable radios that he wants to kit out and these are almost perfect right out of the chute. a little work and some closed cell foam and mine will house my Argonaut and all the associated stuff to use it for an activation.

We saw so much cool stuff that it is hard to remember it all. Things like vacuum tubes galore, along with all the panel meters ever made at one table, and if you look close enough, you can even find vintage crystals in a cigar box here and there.

It was a kit builder’s paradise! We found so many parts to build amps and tuners with and there was a table with nothing but little project kits (I failed to get a photo of that though…) .

We grabbed some lightening arrestors as you can never have too many of those… then started looking for cool old Ten Tec stuff. I was actually looking for two very specific things made by Ten Tec back in the day. One was a Hercules II amplifier and the other was the Collins mechanical filters for my Omni 7 radio. If you happen to read this and know where I can at least get the 500hz Collins filter I would really appreciate it.

Here are some of the Ten Tec rigs we found, minus the Pegasus and the Scout that I forgot to grab a photos of…

The mighty Orion 2 contesting rig even made an appearance!

Something else we noticed early on was the incredible number of Ameritron AL-811 amplifiers that was there! It seemed like every other table had one on it. That is an exaggeration of course, but it did seem like every time we looked up we saw another one. We saw so many that it actually became a little running joke between me and Roger.

About 2 o’clock in the afternoon we realized we needed sustenance and grabbed some nutritious options from the snack bar onsite. As an aside, I have realized that I am now officially vegetarian too. At some point I figured out that I am allergic to beef (probably the result of a tick bite), so I decided to join my daughter, who is vegetarian due to medical issues arising from PANDAS, in being vegetarian as well. Something you need to understand here, I hate vegetables. Yeah, I said it. I cant stand vegetable soup or okra or butter beans, just cant stand most vegetables, but I am figuring it out…ever so slowly.

I don’t know what the big deal is with the whole division in the dietary community too, I just don’t order meat and mind my own business…simple. But you see these vegetarians throwing fits over restaurants not offering things compatible with their diets and meat-a-tarians making fun of the herbivores. I just dont get it, but who knows (obviously not me). I just know that if I don’t eat beef, I don’t wake up in the middle of the night with hives head to toe and itching all over for an hour.

Anyway, I got the fries and pretzel and they were quite delicious. Yes, the pretzel has butter on it and it was awesome! (I am not vegan…lol)

Once fueled up, it was back into the fray. Here are a few photos of some of the highlights I saw…

These keys were amazing! If you want a wonderful key built by a ham, this would be one that I would suggest, they were simply subline.

I even found the youtubers. Lol.

At the end of the day, we finally called it a done deal and headed home with our new treasures. All in all it was a great show and if you are within reasonable driving distance, I would say to give it a shot next year, it was well worth our trip this year to say the least. Thanks for following along and I hope you enjoyed the tour!

72

David - WK4DS