We went to my local park (K-2169) to do a little POTA and to enjoy the nice weather there.
I setup at the canyon rim today in the shade and got my rig setup in my usual tree and everything. I look on the web and the MUF showed that 17 meters was open and I dialed around and did hear stations so that was promising. I tuned up the antenna on an open frequency and started calling CQ…and called and called …and called. No one answered my calls for something like 10 straight minutes. I even had someone respot me once but never heard anyone on the air
I even took a few minutes to confirm that the Ten Tec Argonaut 5 and the Ten Tec 277 Antenna tuner were set correctly with my nanoVNA. They were in fact set correctly…so I just wasn’t being heard on 17 meters. Probably because I am only using 15 watts from the Argonaut. Maybe because the band sucked like a Hoover vacuum cleaner that day, who knows…
This antenna tuner is the Ten Tec 277. It has options to connect a COAX to an antenna, a balanced line to the antenna and even a random wire input (which is what I was using on this day) The variety of connections is what led me to acquire it in the first place, I like the ability to use it with any antenna I have and it works quite well in that role. It is easy to tune and the SWR meter works well too. I don’t use it as a traditional SWR meter though, I use it to watch for changes in the antenna system. If the SWR starts to climb then I know something is changing and I need to look into it, I have had things like the counterpoise wire break in the crimp lug before and not realize it due to it being inside the heat shrink tubing and this meter showed it to me. It also works for tuning purposes if I forget my nanoVNA as well.
My nanoVNA kit is almost entirely adapters and the tiny little VNA over to the side. I love this device and wonder how I got along without one before.
Anyway, back to that activation on that day. Since17 meters was apparently turned off by this point, it was with a heavy heart that I QSY-ed to 40 meters. I tuned up and started calling on this band and it didn’t take long to get someone in the log. After getting quite a few “locals” on 40 meters, I shifted my focus up to 20 meters. For me with my low antennas in park activations I will normally get closer states on 40 meters and more distant stations on 20 meters and higher. That is one of the reasons I like 17 and 15 so much. When they are open I have had great performance with DX stations. If you look at the map below, the close in contacts are all the 40 meter contacts and some of the closer ones are 20 meters.
I just love maps like this one where there is this one lone QSO way off.
It was about this time that the storm clouds really started to look ominous on the western horizon. But they didn’t really seem to be moving closer so I kept going. Well, 20 meters was open is all I can say. My very first QSO on 20 meters was with G3WPF in the UK! I actually thought he was an American station and I was missing the first letter so I had him repeat it a couple of times…lol. I am glad he didnt give up as I figured it out finally and got him in the log. What an awesome way to hop on 20 meters with! DX right out of the chute!!!
As can be seen from the logbook, I had a decent run on 20 meters before two things happened at basically the same time. The storm started to move into the area, and another ham tuned up on top of me and I couldn’t hear stations anymore. I chalk it up to them not being able to hear me as I was only 15 watts into a random wire pretty low to the ground. Anyway, that was enough to get me to call QRT and pack it all up before it got wet.
Until next time I hope to hear you on the air!
de WK4DS 72